User`s manual

Clear off particles or any residue from the top of the
CPU then spread a thin layer of the included
Thermal Grease thoroughly on top of the CPU.
Clip A(⑥) is installed in the factory so
AMD socket users MUST remove
Clip A and install Clip B(
⑧⑧
). Adhere to the following instructions to change the clip.
A. Unfasten the Fan Support Fixing Screws and disassemble the Fan Support from the
Heatsink.
B. Insert Clip B(
⑧ ) in the direction of the Fan Suppor’s *Fan Lead Wire. Make sure the
Clip is inserted under the **Protruded Part of the Fan Support.
C. After installing the Fan Support to the Heatsink, please secure with the Fan Support
Fixing Screws(refer to the diagram below).
Insert the Clip Lever(
⑨ ) into the Clip B( ⑧ ). Connect the Clip's Lug Slot with a Lug of the
Retention Frame on the motherboard. Press onto the Clip Lever(
⑨ ) when aligning the
Lever's Lug Slot and the other Lug.
※ Using a flat-head screwdriver is recommended for easier installation
and removal.
◆ Please refer to Fan Mate 2 Installation and Usage on page 6.
2) Thermal Grease Application
1) Clip Installation
3) Cooler Installation
4) Power Connection (Fan Mate 2 Connection)
※ Please make sure that Clip A/B is installed correctly.
※ Do not exert excessive force on the fan during the installation for it may damage the fan.