User`s manual

Align the Clip Support for Socket 775 ( ③ ) and the Backplate for Socket 775 ( ④ ) with the
mounting holes on the motherboard and fasten them together with the Clip Support Fixing
Bolts (
⑤ ). The Lever Slot on the Clip Support for Socket 775 should be properly oriented
on the hinged side of the Socket Lever when installing.
※ If the Lug of the Clip Support for Socket 775 interferes with any motherboard
components, install the Clip Support for Socket 775 with the Lug facing a different
direction to avoid interference.
Clear off particles and any residue from
the top of the CPU then spread an
adequate amount of the included
Thermal Grease (
② ) on the CPU surface
thoroughly.
Set the Cooler at the center of the CPU. Screw the Installation bolts in slightly, then
tighten each bolt a few turns at a time while alternating between the two until the clip
support is completely pressed against the Clip.
◆ Please refer to Fan Mate 2 Installation and Usage on page 6.
2) Clip Support Installation
3) Thermal Grease Application
4) Cooler Installation
5) Power Connection (Fan Mate 2 Connection)