User`s manual

Caution)
No motherboard components with a height greater than
39mm, as well as the PSU, disk drives, VGA card, and
RAM should be present within a 55mm radius from the
center of the CPU.
1) Clip Installation
Clip A(⑥) is installed in the factory so INTEL socket
users DO NOT have to exchange the Clip. To re-
install Clip A(⑥), adhere to the following instructions.
A. Unfasten the Fan Support Fixing Screws and disassemble the Fan Support
from the Heatsink.
B. Insert Clip A(⑥) in the direction of the Fan Support’s
*
Fan Lead Wire. Make
sure the Clip is inserted under the
**
Protruded Part of the Fan Support.
C. After installing the Fan Support onto the Heatsink, please secure with the
Fan Support Fixing Screws(refer to the diagram below).
※ Please make sure that Clip A/B is installed correctly.
※ Do not exert excessive force on the fan during the installation for it may damage the fan.
1) Intel Socket 775 CPUs
2) AMD Socket AM2/754/939/940 CPUs