User’ s Manual (English version) Intel Pentium 4 Socket 478 CPU Socket 775 CPU (ZM-CS1 separate purchase necessary) AMD Duron/Athlon/Athlon XP/Sempron Socket 462 CPU AMD Sempron/AMD64 (Athlon 64/Opteron) Socket 754/939/940 CPU CNPS7000B * Applies to all versions of CNPS7000B LED. * Please read before installation. http://www.zalman.co.kr http://www.zalmanusa.
1. Features 1) Does not generate noise or vibration in Silent Mode. 2) Pure copper and/or pure aluminum base materials ensure excellent heat dissipation. 3) Intel Pentium 4 (Socket 478), AMD Duron / Athlon / Athlon XP / Sempron (Socket 462), and Sempron / AMD64 (Socket 754/939/940) compatible design for broad compatibility. (To use this product on socket 775, ZM-CS1 must be purchased separately.) 4) 92mm fan inside the FHS maximizes airflow and makes installation easier.
4. Patents Korean Patent Application No. 00-54635 Korean Design Applications Nos. 02-17470, 02-25208, 02-25209 etc. Patent Applications pending in over 20 nations around the world, including USA, EU, and Japan Precautions 1) If excessive force is exerted on the fan, it may malfunction and result in damage to the product and/or the computer. 2) Do not put your finger in the fan while it is running. 3) Keep the product away from children.
6. Compatible CPUs 1) Intel Pentium 4 - Socket 478/775 All CPUs conforming to Socket 478 & all CPUs conforming to Socket 775 up to model 540 Notes) 3.4GHz Northwood, Prescott-478 of 2.8A/E GHz or higher, and Prescott-775 of up to model 540 generate exorbitant amount of heat (84W ~ 103W). Refer to the table below and adjust the fan speed so that the CPU-Case temperature (TC) is lower than the maximum CPU-Case temperature (TC_MAX). Prescott - 478 Northwood CPU 3.4 2.8A/E, 3.0E 69.
3) AMD Sempron / AMD64 - Socket 754/939/940 All CPUs conforming to Socket 754/939/940 platform ① Cautions ) ① No motherboard components with a height greater than 39mm, as well as the PSU, disk drives, VGA card, and RAM should be present within a 55mm radius from the center of the CPU. ② For more information, please visit the Zalman website and refer to “CNPS7000(A/B) Compatible Socket 754/939/940 Motherboards List”link. 7.
8. Installation (AMD Duron / Athlon / Athlon XP / Sempron - 462) 1) Install Clip Supports for Socket 462 Install the clip supports for socket 462 on the motherboard. Make sure to place A-type (blue : installed near the lever) and B-type (white) supports at the appropriate location. The installation should be done in the order of : bolts > small washers > motherboard > small washers > clip supports (see below).
9. Installation (AMD Sempron / AMD64 - 754/939/940) 1) Fasten Nipples Place a small washer on the motherboard. Then, put a nipple over it and fasten the nipple until the Backplate for AMD64 is firmly attached to the motherboard on the opposite side of the CPU. * A Retention Guide is not necessary for installing CNPS7000B on Socket 754/939/940.
※FAN MATE 2 Installation and Usage 1) Installing FAN MATE 2 on the Inside of the System Fan Connector (CNPS7000B) 2) Installing FAN MATE 2 on the Outside of the System Double-sided Tape FAN MATE 2 Motherboard Connect the appropriate 3-pin connector on the cable to the motherboard fan header and the CNPS7000B’s fan connector.
12. Zalman Noise Prevention System When building a noiseless computer, use Zalman’s Noiseless Power Supply, Fanless Northbridge Cooler, Heatpipe HDD Cooler, Noiseless Case Fan, Heatpipe VGA Cooler, and Fan Controller for stable performance and maintain a noiseless environment. Noiseless Power Supply Noiseless Case Fan Fanless Northbridge Cooler Heatpipe HDD Cooler Heatpipe VGA Cooler Fan Controller 13.
