(EnglishVersion) version) (English CNPS9500 AM2 AMD Socket AM2/754/939/940 CPU Opteron Athlon 64 X2 Dual-Core Athlon 64 FX Athlon 64 Sempron * Please read before installation. http://www.zalman.co.kr http://www.zalmanusa.
1. Features 1) Compatible with AMD Opteron, Athlon 64 X2 Dual-Core, Athlon 64 FX, Athlon 64, and Sempron for Socket AM2/754/939/940. 2)Pure copper heatsink with component layout optimized for maximum cooling efficiency. 3) Innovative, patented, and curved heatpipe design for a heat transfer capacity of up to six heatpipes with the use of just three. 4) Ultra slim fins (0.2mm) for minimized weight and reduced airflow resistance. 5) Adjustable fan speed controller (FAN MATE 2) included. 2.
4. Patents Korean Patent Application No. 05-45737 Korean Design Application No. 05-15303, 15304, 15306, 15307, 17970, 17971 Patent Applications pending in over 20 nations around the world including USA, EU, and Japan 5. Precautions 1) If excessive force is exerted on the fan, it may result in malfunction or damage to the product and/or the computer. 2) Avoid inserting any objects into the fan while it is in operation. 3) Keep the product away from the reach of children and pets.
8. Installation Requirements Cases equipped with an Air Guide must have their Air Guide Ducts removed before installation. Install only on systems meeting the following conditions : ① There must be no interfering components (e.g. PSU, VGA card) within 56mm distance from the center of the CPU. ② There must be no interfering components (e.g. ODD) within 45mm distance from the center of the CPU. ③ Case chassis cover must be distanced at least 135mm away from the motherboard.
② Clip Installation First check the orientation of the Retention Frame of motherboard, then install the clip accordingly by referring to the diagrams below. ※ Note : If the Retention Frame is vertically mounted on the motherboard, then the lever can be coupled with clip after the clip is fully inserted into the cooler.
10. FAN MATE 2 Installation and Usage 1) Installing FAN MATE 2 inside the System 2) Installing FAN MATE 2 outside the System Control Knob Fan Connector (CNPS9500) Double - sided Tape FAN MATE 2 6-Pin Connector CPU Fan Header Motherboard Connect the appropriate 3-pin connector on the cable to the CPU Fan Header and to the CNPS9500’s Fan Connector. Pull the 6-pin Connector out of the system and connect it to FAN MATE 2, which can be attached to the case with the Double-Sided Tape.
12. Zalman Computer Noise Prevention System The use of Zalman’s Noiseless Power Supply, CPU Cooler, Case Fan, Fanless Northbridge Cooler, and Video Card Cooler will allow you to achieve stable performance and maintain a noiseless environment. Noiseless Power Supply Noiseless Case Fan Fanless Northbridge Cooler Heatpipe HDD Cooler Quiet VGA Cooler Fan Controller 13.
