User's Manual

4
WWW.ZALMAN.COM
3. Name of Parts
4. Assembly Product
No. Parts
① USB 2.0 Port : Power bank
②
micro-B USB Port : USB 3.0 Cable
③
Power button
* Long press more than 2sec
: Power On / Off
*Short press less than 2sec
: Display the battery capacity
④
Reset button hole
Long press button(15sec) : Restore Factory
Settings
⑤
WiFi indicator
⑥
Bridge mode indicator
⑦ External HDD indicator
⑧
Power / Charger indicator
1) Power Level 50 ~ 100% : Green LED
2) Power Level 25 ~ 49% : Yellow LED
3) Power Level 0 ~ 24% : Red LED
4) Unit charging : Flashing Green LED
①
②
③
④
⑤ ⑥ ⑦ ⑧
② HDD set into PCBA and close top cover
(Apply EMI Shielding tape)
① Remove the top cover and HDD into Shielding and fixed by 2 bolt A and Bolt cover.
③ Bolt B from bottom and add rubber foot
Bolt cover
Bolt A
Bolt B
Rubber foot