User's Manual

4.6.OVER-CURRENT PROTECTION
OUTPUT VOLTAGE Max. overcurrent limit
+3.3V 45.0A
+5V 45.0A
+12V1 DC 15.0A
+12V2 DC 20.0A
4.7.SHORT CIRCUIT PROTECTION
Output short circuit is defined to be a short circuit load of less than 0.1 ohm.
In the event of an output short circuit condition on +3.3V, +5V or +12V output, the power supply will shutdown and
latch off without damage to the power supply. The power supply shall return to normal operation after the short circuit
has been removed and the power switch has been turned off for no more than 2 seconds.
In the event of an output short circuit condition on –12V output, the power supply will not be damaged. The power
supply shall return to normal operation as soon as the short circuit has been removed. and the power switch has
been turned off for no more than 2 seconds.
4.8. POWER SIGNAL