User guide

Storing the iPad2 for travel
To store the iPad 2
1. Line up the 30-pin port connecter on the
iPad 2 with the slot on the short end of the
Keyboard Case.
2. Place the iPad 2, screen down, into the
Keyboard Case.
To separate the iPad 2 from the
Keyboard Case
1. Place the iPad 2/Keyboard Case vertically on
a non-slip surface. Refer to the drawing.
2. Place one hand on each side of the Keyboard
Case, securing the Keyboard Case with one
thumb and the iPad 2 with your other thumb.
3. Apply slight downward pressure to the
iPad 2 and separate the Keyboard Case from
the iPad 2.
Battery
The Keyboard Case uses a long-life,
rechargeable battery that gives you several
weeks of normal use. The Keyboard Case goes
into sleep mode if it’s left on and not being used.
Press any key and wait a second or two to bring
the Keyboard Case out of sleep mode.
The lithium-polymer battery in the Keyboard
Case has no memory eect and may be charged
whenever you wish.
When not in use for a prolonged period, we
recommended that you turn o the keyboard to
lengthen the battery life.
Special features and options
Please note that the Keyboard Case is made
from aircraft aluminum with a high-grade finish
similar to the finish on many popular devices.
Optional: A set of four rubber feet is
included, which you can place on each
corner of the Keyboard Case bottom to help
prevent scratching high-grade finish of the
Keyboard Case.
For unparalleled scratch protection, we
recommend ZAGG’s invisibleSHIELD®
or ZAGGskins™.
What do you think?
Please take a minute to tell us. Thank you for
purchasing our product.
www.logitech.com/ithink
Keyboard
cutout