User`s manual
BL160082 s Prototyping Board
Introduction
The BL1600 was designed to allow customers to build expansion boards
that piggyback on the BL1600. Z-Worlds Prototyping Board lets you
develop such circuitry efficiently. The Prototyping Board is an array of
uncommitted pads on 0.1" centers. Five power rails bring ±15 V, +5 V,
and ground to the pads. The rails are spaced with pads judiciously
connected so that you easily place and connect 300-mil and 600-mil DIPs.
A large section of the board is available for discrete components.
The Prototyping Board has direct connections to the BL1600s input/
output headers: the PLCBus port, expansion header, digital inputs, digital
outputs, and serial ports. The BL1600 can access up to 48 addresses on an
expansion board.
Features
Compactness
The Prototyping Board fits directly over the BL1600, providing a sound
foundation for your design.
Power Rails
There are five power rails on board allowing ICs and components easy
access to various operating voltages. Each power rail supplies +15 V,
-15V, +5 V, and ground.
Direct Header Connections
All the BL1600 headers connect directly the Prototyping Board.
Sea of Pads
An array of pads is provided for DIPs and discrete components. Pads and
power rails are arranged and interconnected so that it is easy to place and
connect 300-mil and 600-mil DIPs.
Extra Pads
Extra pads bring out signals from the PLCBus and the expansion header
for easier soldering.