User`s manual

BL160072 s Specifications
Table B-1. BL1600 General Specifications
Parameter Specification
Board Size
4.52" × 4.175" × 1.0"
(115 mm × 106 mm × 25 mm)
Operating Temperature -40°C to 70°C, may be stored at –55°C to 85°C
Humidity 5% to 95%, noncondensing
Power 9 V DC to 30 V DC, 150 mA, linear supply
Digital Inputs 12, TTL and CMOS compatible, 2.5 V digital
threshold (8 additional inputs possible when
PLCBus is not used)
Digital Outputs
14, TTL and CMOS compatible — 7 of these are
high-current outputs and can sink 100 mA each at
50°C and 48 V DC; a single channel can sink up
to 500 mA continuously at 25°C
Processor Z180
Clock 9.216 MHz
SRAM 32K standard, supports up to 512K
EPROM
32K standard, may be replaced with 128K or
256K flash EPROM
Flash EPROM May replace factory-installed EPROM
Counters Software-implementable
Serial Ports
Two RS-232 OR one RS-232 (with CTS/RTS)
and one RS-485
Serial Rate Up to 57,600 bps
Watchdog Yes
Time/Date Clock Yes
Backup Battery
Renata CR2325RH 3 V DC lithium ion, rated life
190 mA
h
Electrical and Mechanical Specifications
Table B-1 lists electrical, mechanical, and environmental specifications for
the BL1600.