Technical information

There is a primary funnel located on each of the corners of the vehicle. Operators should

verify that these areas are clear before energizing the system and deploying the primary

funnels.

1.2.2 General Safety Rule

The ACM control system should not be turned on or running with obstructions or

personnel in any of the regions where the automated equipment is located or could be

deployed.

The control system can be shut down and re-started without any lag or start up time. If

there are any concerns with safety of personnel or equipment the system should

immediately be turned off.

Work on the ACM equipment should only be conducted by certified personnel.

Operators of the ACM must be trained and familiar with the machine before using

it in traffic conditions. Safe operation is mandatory.

Figure1.0 AHMCT Automated Cone Machine

Stowage System

Cone Stack

Lateral Conveyor

Drop

Box

Retrieval

Arm

Primary

Funnel

Secondary

Funnel