Technical information

Machine Operation 25

DRV Operator’s Manual and Technical Reference (rev 1 0 June 30, 2000)

2.1.5 System Power On

Place the power switch on the operator’s console in the "ON" position. After the controller

diagnostic checks have completed, the power light will begin to blink.

2.1.6 Joystick Calibration

The operator joysticks should be calibrated at the beginning of each shift. With the "emergency

stop" placed in the "IN" position, place both the "left guard" and "right guard" toggle switches in

the down position simultaneously. The "guard up" light should illuminate when the calibration

procedure is complete.