User`s manual

PK2100
Appendix B: Specifications s B-3
Table B-1 presents the specifications for the PK2100 series of controllers.
Table B-1. PK2100 Specifications
Board Size
5.5” × 6.76” × 0.78”
Enclosure Size
5.5” × 7.0” × 1.6”
Operating Temperature
• Controller
• LCD
-40–+70°C
0–+50°C
Humidity 5%–95%, noncondensing
Input Voltage and Current
• 18–35 V D.C., 220 mA, linear supply—
PK2100/PK2120
• 9–15 V D.C., 220mA, linear supply—
PK2110/PK2130
Configurable I/O No
Digital Inputs
7 protected, -48–+48 V,
2.5-V digital threshold
Digital Outputs
• 10 channels, sinking continuously 150 mA
each at 50°C and 48 V D.C.
• 1 channel, sinking continuously 500 mA at
25°C
• 2 SPDT relays, 3 A at 48 V
Analog Inputs
• 6 “universal inputs”
• 1 10-bit, high-gain differential input
Analog Outputs
2 jumperable as 0–10 V (0–7 V for PK2110/
PK2130) (10 bits) or 0–20 mA (0–15 mA for
PK2110/PK2130) (second output not available
if high-gain analog input is in use)
Resistance Measurement
Input
No
Processor Z180
Clock Speed 6.144 MHz (9.216 MHz optional)
SRAM 32 kbytes (supports up to 512 kbytes)
EPROM 32 kbytes (supports up to 512 kbytes)
Flash EPROM* Supports up to 256 kbytes
Counters 2 in hardware, others in software
Serial Ports
•
1 RS-232 (with RTS/CTS handshake)
• 1 RS-232 or RS-485/RS-422 (4-wire)
Serial Rate
Up to 38,400 baud
(57,600 baud at 9.216 MHz)
Watchdog/Supervisor Yes
Time/Date Clock Yes
Memory Backup Battery
CR2354-1GU or equivalent, 3-year shelf life,
10-year life in use
Keypad and LCD Display
• 2 × 6 keypad
• 2 × 20 character LCD
PLCBus Port Yes
* Flash EPROM replaces standard EPROM.