User`s manual

PK2200 Subsystems s 31
Table 3-5. Header Connections and Function
Header Function
H1
The LCD connector. Connect a 14-wire ribbon cable
from the LCD to this header. Not used on the PK2240.
H2 The PLCBus expansion connector. This connector
supports the “LCD bus” as well. Use a 26-pin ribbon
cable to attach PLCBus devices to the PK2200.
H3 The keypad connector. Connect a 10-wire flat flexible
cable from the keypad to this header. Not used on the
PK2240.
Keypad and Display
The PK2200 Series supports operator I/O through both keypad and LCD.
The following two standard operator I/O configurations are available on
PK2200 controller models with enclosures:
 2-row by 20-column character LCD module plus
a 2-row by 6-column keypad.
 128-column by 64-row backlit graphic LCD module plus
a 4-row by 3-column keypad.
The character LCD module is also available with an LED backlighting
option and the graphic LCD has a software controllable electrolumines-
cent backlighting installed as a standard feature. Table 3-5 lists and
describes header connections and functions.
The PK2200 series also interfaces easily with the Z-World line of
operator interface products. Operator interfaces are available with a
variety of keypad sizes and LCD configurations.
For more information on Z-World operator interfaces,
contact your Z-World Sales Representative at
[phone].
(