User`s manual

PK220020 s Getting Started
Running a Sample Program
To run a sample program on the PK2200 use the following steps.
1. Open the sample program CDEMO
_
RT.C located in the SAMPLES\CPLC
Dynamic C subdirectory.
2. Compile the program by pressing F3 or by choosing Compile from the
compile menu. Dynamic C compiles and downloads the program into
the PK2200s memory.
During compilation, Dynamic C rapidly displays several messages in
the compiling window. This condition is normal.
If an error message such as Target Not Responding or
Communication Error is displayed, see Appendix A,
Troubleshooting.
3. Run the program by pressing F9 or by choosing Run from the Run
menu.
4. To halt the program, press <Ctrl-Z>.
5. To restart program execution, press F9.
Refer to Z-Worlds Dynamic C Technical Reference Users
Manual for instructions regarding the use of the Dynamic C
development system.
$
$