User`s manual

PK220018 s Getting Started
Connecting the PK2200 to a PC
The PK2200 is programmed with a PC through an RS-232 port using the
programming cable provided in the Development Kit.
To connect the PK2200 to a PC use the following steps:
1. Install Dynamic C as described in your Dynamic C manuals.
2. Using the supplied adapter, connect the programming cable from the
PK2200s RJ-12 (J2) socket to the appropriate COM port of your
computer.
Figure 2-1. Programming Connections
Only use the supplied adapter and programming cable.
The supplied 24 V wall power supply is sufficient for all power
requirements. The PK2200 accepts from 9 V to 36 V DC.
3. Connect the supplied 24V DC power supply as follows.
 Connect the lead with the red sleeving to the +DC terminal of the
PK2200 (J1 terminal 1).
 Connect the other lead to the GND terminal (J1 terminal 3).
Programming
Cable
Adapter
To PC's
COM
Port
PK2200 Series Controller
!