User manual

OceanWorks International
120 – 6741 Cariboo Road
Burnaby, BC V3N 4A3
Canada
www.oceanworks.com
Document Number: 0848-RPT002 Subsea System User Manual
Author: Graham Cunliffe Page 17 of 27 Revision 1.0
Figure 7.3.6. RFU “Browse for Image” Screen
Once the correct image has been located, click the file name to select it. The “Passphrase”
screen (see Figure 7.3.7) is then presented.
Figure 7.3.7. RFU “Passphrase” Screen
There is no passphrase imposed on the system, so click the “OK” button to start loading the
image. This will take approximately 70 seconds to accomplish.
7.4. Software Tools
The following software tools are required for the maintenance of the JB:
- Z-World© Dynamic C integrated development environment, version 9.21.
- Z-World© Remote Field Utility (RFU,) version 2.5 (required for loading the
binary image onto the sub-sea controller). It is possible (and useful) to
compile and load directly to the sub-sea board from the IDE and for
development and testing of the software this is the preferred mode of
operation.