User manual

OceanWorks International
120 – 6741 Cariboo Road
Burnaby, BC V3N 4A3
Canada
www.oceanworks.com
Document Number: 0848-RPT002 Subsea System User Manual
Author: Graham Cunliffe Page 16 of 27 Revision 1.0
Figure 7.3.4. RFU “Communications Options” Screen with Programmer Information
If the programmer’s IP address displayed in the “Network Address” field is correct, click the
“OK” button. Now select “File” on the menu bar in the main screen. This will bring up the
“Choose Flash Image” screen (see Figure 7.3.5), where you select the binary image to
download to the JB.
Figure 7.3.5. RFU “Choose Flash Image” Screen
Browse for the desired file by clicking the browse button. A screen similar to that shown in
Figure 7.3.6 will be displayed.