User manual

OceanWorks International
120 – 6741 Cariboo Road
Burnaby, BC V3N 4A3
Canada
www.oceanworks.com
Document Number: 0848-RPT002 Subsea System User Manual
Author: Graham Cunliffe Page 15 of 27 Revision 1.0
Figure 7.3.2. RFU “Communications Options” Screen
Ensure that the TCP/IP option “Use TCP/IP Connection” radio button is selected. If the
Network Address displayed is correct, click the “OK” button to proceed. Otherwise, the RFU
needs to find programmer units that it can communicate with. This is accomplished by
clicking the “Discover” button. The “Discovery” screen given in Figure 7.3.3 is then displayed.
Figure 7.3.3. RFU “Discovery” Screen
Once the RFU has located programmers that it can communicate with, a list of such
programmers is presented in the “Discovery” screen. Select the desired programmer by
clicking the line that it is presented on and then click the “Select” button. The result of these
actions should be to place the desired programmer’s IP address in the “Communications
Options” screen as shown in Figure 7.3.4.