Instructions

6
Device
The Device Tab gives access to overview pages with more detailed information about the devices in the network and their
actual status.
Status:
This dialog shows the actual network status of all devices. All devices are listed by their node id and name. The date/time
indicates the time of the last successful communications between the controller and this device (either confirmed sending
or reception). The green checkmark indicates that the device is alive. A red sign indicates that the controller assumes the
device not being active anymore. Mains powered devices can be checked for their network availability by hitting the
“Check connectivity” button.
In case the device interview and configuration was not performed properly a little question mark icon will indicate this.
Clicking on the question mark will open a window displaying the details of the interview process.
The correct loading of a Device Description File is indicated as well. For battery-operated device the time of the last
wakeup, the time of the next wakeup and the current wakeup status is shown. Clicking on the table heads reorders the
table view of the data. Clicking on the table heads reorders the table view of the data.
Battery
This dialog gives an overview of the battery status of the battery-operated devices in the network. Devices are listed by
name and id. The last reported battery level (0…100 %) including update time is shown as well as the number and type of
battery if known. The “Update” button will request a status update from the device. The new status will be available after
the next wakeup of the device. Clicking on the table heads reorders the table view of the data.