Instructions

4
The Network Information box offers some statistics about the number of devices in the network and how many of them
are mains or battery operated. The network health box will list devices that have problems: the battery is down, the
interview is not complete or the device failed. Clicking on the statement will lead to a help page explaining the problems
and giving guidance for remediation.
Control
The Control Tab allows operating the various types of devices and shows the reported values in case of sensors or meters.
In case the control options offered here are not sufficient please refer to the Expert Command Tab as part of the
Configuration menu for a full set of functions supported by the device.
Switch
The switch dialog lists all devices of the network supporting switching, dimmer or motor control capabilities. The device
name and Id and the current status of the switch is given and the time of the last status update. The “Update” button
forces an immediate update of the switch (if mains powered device). A ‘Switch All’ Icon shows whether or not the specific
device will react on a Switch All ON or Switch All Off command. A green triangle indicates that the device will react to the
command shown.
All actuators can be switched on or off. Dimmer and motors controls can be operated using a slider. For dimmer there is a
button “On” and “Full”. “Full” turns the dimmer always to 100 % diming value while “On” will turn to the last dimming
state before the dimmer was turned off. Clicking on the table heads reorders the table view of the data.
Sensors
The sensor dialog lists all devices of the network providing sensor information. Device name and id, the type of the sensor,
the actual sensor value and the sensor scale is listed. The Date/time column indicates when the given sensor value was
received. It’s possible to call for a sensor update but bear in mind that battery operated device will only respond after the
next wakeup.