Instructions

13
Routing
This table shows the neighborhood relationship of devices. The id, the name and the type of the node are listed. Dark
green indicates that the two devices are in direct wireless neighborhoods and don’t need any other device to forward their
signals. A Light green connection needs one router between. Yellow color indicates that the communication route is just
ok. This can be achieved by longer but multiple routes. A red color between two nodes indicated an insufficient
communication link. A little black dot in the colored field indicates that the current configuration of the network requires
these two nodes to communicate with each other due to an association relationship. The ‘Update’ button calls the device
to scan its neighborhood and report back the result to update its own line of the routing table.
Reorganization
The reorganization page controls an algorithm that reorganizes the network relationships and fixes problems. With
checkboxes different stages of the algorithm can be selected. The result of the reorganization is shown in a log and can be
downloaded.
Timing Info
The Timing tab shows some very valuable timing information of communications between the controller and other
devices. All other devices the controller has communicated with are shown in a list. The number of packets and the
percentage of successful communication are shown. This can give an indication about the stability of the communication