User manual

12
CONFIGURATIONS
Doc# 27-0044UM Rev B Issued 7/13/2012
3.9 REMOVING THE LOCKABLE FACE PLATE COVER
NOTE: The Lockable Face Plate Cover is an
option available only to certain models.
3.10 INSTALLING THE LOCKABLE FACE PLATE COVER
1. Using the provided key, turn to the
right to unlock the face plate cover.
3. Pull the right side of the face plate cover
away from the right support bracket.
4. Slide the face place cover away and
towards the right from the left side
support bracket.
2. Using your fingers, twist to release the
attachment screws on the left side of the
face plate cover.
1. The face plate cover has small anges
on the left side that perfectly fit within
corresponding slots on the support
bracket on the left side.
4. Align the anges on the left side of the
face plate cover with their corresponding
slots on the left support bracket.
5. When the left flanges are secured in
the support bracket, position the right side
of the face at cover onto its corresponding
support bracket.
6. When both sides are secured onto
their respective support brackets, turn
the key to lock the face plate cover.
2. The top of the left support bracket has
a corresponding slot to accept the face
place cover anges.
3. The bottom of the left support bracket
also has a corresponding slot for acceptance
of the ange
Contents
Setup
Operations
Troubleshooting
Appendix
Support
Congurations
Maintenance