Service manual

Chapter 9 Storage Devices 9-5
g. Place the chassis bracket on an antistatic surface.
FIGURE 9-2 Removing and Replacing the Chassis Bracket
9.2.2 Replacing the Chassis Bracket
Caution – Use proper ESD grounding techniques when handling components. Wear
an antistatic wrist strap and use an ESD-protected mat. Store ESD-sensitive
components in antistatic bags before placing it on any surface.
1. Replace the chassis bracket as follows (
FIGURE 9-2):
a. Position the chassis bracket upside down on top of the power supply.
Diskette cable
SCSI cable
CD-ROM drive
(or optional tape drive)
Diskette drive
Chassis bracket