Service manual

Chapter 8 Major Subassemblies 8-13
FIGURE 8-6 Removing and Replacing the Shroud Assembly Speaker
8.4.2 Replacing the Shroud Assembly Speaker
Caution – Use proper ESD grounding techniques when handling components. Wear
an antistatic wrist strap and use an ESD-protected mat. Store ESD-sensitive
components in antistatic bags before placing it on any surface.
1. Replace the shroud assembly as follows (
FIGURE 8-6):
a. Position the speaker into the shroud assembly.
b. Connect the speaker connections.
c. Using a number 2 Phillip screwdriver, replace the screw securing the speaker to
the shroud assembly.
2. Detach the wrist strap.
3. Replace the system unit cover.
See Section 7.3 “Replacing the System Unit Cover” on page 7-4.
4. Connect all cables to the back of the system or server unit.
System unit
Shroud assembly
Speaker
Speaker
connections