Service manual

Chapter 8 Major Subassemblies 8-7
FIGURE 8-3 Removing and Replacing the SCSI Cable Assembly
8.2.2 Replacing the SCSI Cable Assembly
Caution – Use proper ESD grounding techniques when handling components. Wear
an antistatic wrist strap and use an ESD-protected mat. Store ESD-sensitive
components in antistatic bags before placing it on any surface.
1. Replace the SCSI cable assembly as follows (
FIGURE 8-3):
a. Position the SCSI cable.
SCSI cable
P2
P1
P3
J1202
J1203