Service manual

Chapter 3 Power-On Self-Test 3-9
1> Data Cache Tags Test
1>MMU Enable Test
1> DMMU Registers Access Test
1> DMMU TLB DATA RAM Access Test
1> DMMU TLB TAGS Access Test
1> IMMU Registers Access Test
1> IMMU TLB DATA RAM Access Test
1> IMMU TLB TAGS Access Test
1> DMMU Init
1> IMMU Init
1> Mapping Selftest Enabling MMUs
1>FPU Register Test
1> FPU Registers and Data Path Test
1> FSR Read/Write Test
1>Memory Test
0>Memory Test
1> Memory Clear Test
0> Memory Clear Test
1> Test being relocated into Memory
0> Test being relocated into Memory
1> Memory RAM (blk) Test
0> Memory RAM (blk) Test
1> Test being relocated into Memory
0> Test being relocated into Memory
1> Memory Stress Test
1> Test being relocated into Memory
0> Memory Stress Test
0> Test being relocated into Memory
1> Memory Address Line Test
1> Test being relocated into Memory
0> Memory Address Line Test
0> Test being relocated into Memory
1>CPU Speed
1> CPU 1 Running at 200 MHZ.
0>Forcing ECC Faults Test
0> ECC CE Pattern Test
0> ECC CE Check bit Test
0> ECC UE Pattern Test
0> ECC UE Check bit Test
0>SysIO Registers Test
0> SysIO Regsiter Initialization
0> IOMMU Registers and RAM Test
0> Streaming Buffer Registers and RAM Test
0> SBus Control and Config Registers Test
0> SysIO RAM Initialization
0>SysIO Functional Test
CODE EXAMPLE 3-1 diag-level Variable Set to max (Continued)