Service manual

3-8 Sun Ultra 2 Series Service Manual • July 1996
0> Found Memory Group #332Mb32Mb32Mb32Mb
0> Found 640 Megabytes of usable Main Memory
0>SIMM Group Base Addr Size Group Status
0> 0 00000000.00000000 10000000 00
0> 1 00000000.20000000 08000000 00
0> 2 00000000.40000000 08000000 00
0> 3 00000000.60000000 08000000 00
0>Quick Memory Test
0>Clear and Test Stack Memory
0>
SelfTest Initializing
0>Basic CPU Test
0> Instruction Cache Tag RAM Test
0> Instruction Cache Instruction RAM Test
0> Instruction Cache Next Field RAM Test
0> Instruction Cache Pre-decode RAM Test
0> Data Cache RAM Test
0> Data Cache Tags Test
0>MMU Enable Test
0> DMMU Registers Access Test
0> DMMU TLB DATA RAM Access Test
0> DMMU TLB TAGS Access Test
0> IMMU Registers Access Test
0> IMMU TLB DATA RAM Access Test
0> IMMU TLB TAGS Access Test
0> DMMU Init
0> IMMU Init
0> Mapping Selftest Enabling MMUs
0>FPU Register Test
0> FPU Registers and Data Path Test
0> FSR Read/Write Test
0>EPROMs Test
0> PROM Datapath Test
0>Serial Ports Test
0> Slavio Serial Ports Test
0>NVRAM TOD Test
0> M48T59 (TOD) Init
0> M48T59 (TOD) Functional Part 1 Test
1>
SelfTest Initializing
1>Basic CPU Test
1> Instruction Cache Tag RAM Test
1> Instruction Cache Instruction RAM Test
1> Instruction Cache Next Field RAM Test
1> Instruction Cache Pre-decode RAM Test
1> Data Cache RAM Test
CODE EXAMPLE 3-1 diag-level Variable Set to max (Continued)