Service manual

Appendix C Functional Description C-19
7. Open the Use Template menu, and select one of the following:
■ Modem - Dial-Out Only
■ Modem - Dial-In Only
■ Modem - Bidirectional
8. Select Apply.
9. Set your modem auto-answer switch to one of the following:
■ For Modem - Dial-Out Only, set the switch to Off.
■ For Modem - Dial-In Only, set the switch to On.
■ For Modem - Bidirectional, set the switch to On.
C.1.12.2 Serial Port Speed Change
You must edit the /etc/remote file to change the speed of a serial port:
1. Become rootsuperuser, and type cd /etc.
2. Type vi remote.
3. Type tip speed device-name.
4. Typical speeds are 9600, 19200 to 38400 bps. The device name is the serial port
name — for example, /dev/tty[a,b] or /dev/term/[a,b].
5. Press Return and type wq to save your file change(s) and to exit from the vi text
editor.
C.1.12.3 Recommendations
Cable
For a modem-to-host (system) connection, use an RS-423/RS-232 straight-through
cable with DB-25 male connectors at both ends.
% su
Password:
# cd /etc