Service manual

10-20 Sun Ultra 2 Series Service Manual • July 1996
FIGURE 10-15 Incorrect and Correct Ways to Seat the DSIMM
5. Detach the wrist strap.
6. Replace the system unit cover.
See Section 7.3 “Replacing the System Unit Cover” on page 7-4.
7. Connect all cables to the back of the system or server unit.
8. Power on the system unit.
See Section 6.1 “Powering On the System Unit” on page 6-1.
10.6 Motherboard
To remove and replace a motherboard, proceed as follows.
Incorrect:
Corners Not Evenly Seated
Correct:
Corners Evenly Seated
DSIMM notch