Service manual

10-18 Sun Ultra 2 Series Service Manual • July 1996
4. Locate the DSIMM to be removed.
5. Push the ejection lever away from the DSIMM (
FIGURE 10-14).
6. Remove the DSIMM from the socket.
FIGURE 10-14 DSIMM Ejection Lever
10.5.2 Replacing a DSIMM
Caution – Do not remove any DSIMM from the antistatic container until ready to
install it on the motherboard. Handle DSIMMs only by their edges. Do not touch
DSIMM components or metal parts. Always wear a grounding strap when handling
DSIMMs.
Caution – Use proper ESD grounding techniques when handling components. Wear
an antistatic wrist strap and use an ESD-protected mat. Store ESD-sensitive
components in antistatic bags before placing it on any surface.
Caution – Each DSIMM group must contain four DSIMMs of equal density and at
least 60-nanosecond speed (for example: four 16-Mbyte DSIMMs) to function
properly. Do not mix DSIMM densities or speeds within any group.
1. Unlock and lift the DSIMM cover.
Ejection lever
DSIMM