Service manual

10-2 Sun Ultra 2 Series Service Manual • July 1996
Caution – Use proper ESD grounding techniques when handling components. Wear
an antistatic wrist strap and use an ESD-protected mat. Store ESD-sensitive
components in antistatic bags before placing it on any surface.
3. Attach the wrist strap.
See Section 7.2 “Attaching the Wrist Strap” on page 7-3.
4. Grip the sides of the shroud assembly processor area (
FIGURE 10-1).
5. With the thumb of each hand, simultaneously lift the CPU module levers upward
and to the side at an approximate 135-degree angle (
FIGURE 10-2).
6. Lift the CPU module upward until it clears the shroud assembly.
7. Place the CPU module on an antistatic surface.
FIGURE 10-1 CPU Module Locations and Shroud Assembly Processor Area
Shroud assembly
processor area
CPU module
slot 0
CPU module
slot 1