Service manual

9-10 Sun Ultra 2 Series Service Manual • July 1996

6. Remove the diskette drive as follows (FIGURE 9-4):

a. Remove the diskette data cable assembly.

See Section 8.2.3 “Removing the Diskette Drive Cable Assembly” on page 8-8.

b. Position the chassis bracket on top of a flat surface.

c. Using a number 2 Phillips screwdriver, remove the four screws securing the

diskette drive to the chassis bracket.

7. Remove the diskette drive.

FIGURE 9-4 Removing and Replacing the Diskette Drive

Diskette drive

cable

Screw (4)