User manual

Doc# 27-0005UM Issued 11/00 Rev 1.0

The display protective lens is intended to protect the surface of the screen from

damage while in transit or during storage. The protective lens is not intended

to be used while the StarGate is in operation, but can be used.

Make sure the StarGate

is in the closed position.

Move the protective lens

release catch (located

above the display) up.

While holding up the

release catch, slide the

protective lens to the left

or right.

Slide the protective lens

off the edge of the

display.

To reinstall the display

protector during long

storage or shipping, just

reverse this process.

Protector Removal