User manual

Doc# 27-0005UM Issued 11/00 Rev 1.0
Install StarGate
It is worth getting oriented to the StarGate before mounting it in the rack.
The StarGate is a flat
LCD that mounts on the
front of the RETMA rails
of a standard 19 rack.
The dual locks can be
seen on the vertical
handle to the left. The
display controls are
located on the bottom
below the display.
On the right side of the
back is the on/off switch,
with the receptacle for
the AC power cord on
the power supply on the
bottom.
On the center left side
of the back is the mini
din receptacle for the
power plug for the cord
that leads from the
power supply to the
display. Also, the video
connector.
The StarGate display
swings out to the right.
The bracket that mounts
to the front of the
RETMA rails is on the
left.
On the top and bottom
of the mounting bracket
is the receptacle for
securing the display flat
against the rack.
Using both hands,
press and slide the lock
releases inside the
handle on the left side
of the display towards
each other to release
the locks and allow you
to swing open the
StarGate.
7