User manual

Doc# 27-0005UM Issued 11/00 Rev 1.0
Monitor Adjustments
Step 1: Power Up
After the installation instructions have
been followed:
 Turn on power to the computer/
workstation.
 Turn on power to the StarGate.
The StarGate will then:
 Illuminate the Power indicator on
the front panel.
 Perform self tests.
 Search for and automatically
determine the frequencies and sync
type of the incoming video signals.
 Illuminate the stby indicator on
the front panel while powering up
and searching for proper sync
signals.
 Extinguish the Stby indicator on
the front panel after acquiring
proper sync signals.
 Display the video image on the
screen.
NOTE: A black band at the top and
bottom of the display may be visible
at certain resolutions. This is
normal, as the expanded screen in
some resolutions does not precisely
fit the StarGate screen dimensions.
13