COMMAND CONSOLE Monitor User Manual 14

Doc# 27-0001UM Issued 7/99 Rev. 1.2
MENU DESCRIPTIONS
AUTO ADJUSTMENT
Select this control to adjust the size
and position automatically. It takes a
maximum of 10 seconds to complete.
This control allows adjustments to the
black level of the display screen.
Selection of this control allows making
adjustments to the luminosity level of
the display screen.
Use this control and then use the
and buttons to center the image
horizontally on the screen.
Select this control and then use the
and buttons to center the image
vertically on the screen.
Select these controls, then use the
and buttons until the screen
images looks focused, crisp and
sharp.
NOTE: This item must operate on
full screen image. If it does
not, it is possible to operate
abnormally.
CONTRAST
BRIGHTNESS
H-POSITION
(HORIZONTAL POSITION)
V-POSITION
(VERTICAL POSITION)
TUNING & FINE TUNING
Monitor Adjustments
15