ASSEMBLY INSTRUCTION SKU CODE: (WF287220-WF287221) This set is included 2 boxes if don't receive full 2 boxes please contact our customer service team 01/14
SAFETY WARNINGS ! This bed is designed for use only mattress(es) meeting the following specifications on the upper bunk, and lower bunk: Bed Type Length Width Thickness Twin Standard 74-75" 3387" 8" max Full Standard 747-75" 5372" 8" max Replacement parts, including additional guardrails, may be obtained from any of our (CLOUDED TECHNOLOGY (USA) INC) dealers Follow the information on the warnings appearing on the upper bunk bed end structure and on the carton. Do not remove waning label from bed.
Part List & Hardware List(BOX 2-wr287220) Bottom Bottom Bottom Ad AS AB Bottom Upper Upper A7| n Upper A8 Upper B1 Side Rails-PCs B2 Horizontal Bar-PCs C1 Vertical Bar-PCs C2 Vertical ii C3) J Vertical Bar-PCs C4 | Vertical Bar-PCs ~ Wood Bars-PCs D3™ Wood Bars-PCs D4 Wood Bars-PCs D5) Wood Bar-PCP H2 0 Center Legs-PCs 05/14
Hardware List Screws 1/4" x80 Wood dowel PCs PCs Wood Screws pests 4 5 212 x80 Wood dowel PCs Wood Screws PCs Wood dowel PCs 21/4" x 80 mm 21/4" x 15 mm @1/4" x 30 mm Hex-Head bolts PCs Horizontal-Hole bolts PCs Hex-Head bolts PCs Allen Key 1pc Wood Screws PCs Co— Assembly Tools Required (Not Included) 06/14
FN ~— PCs) PCs) |16(pcs) (x3) Panels Following below illustration: -Using Dowel #1411 location with D2,D4 wood bar and D1 STEP 1-1: H Using Hardware #2 connect A1,A2 legs with D2,D4,D5 wood bar STE P 1 -2: Following below illustration: 0714
STE P 1 -3: Following below illustration: 3 |-Using Hardware #3 connect D3 wood bar with Frame{completed on step 1-2) > 2 STE Following below illustration: -Using Hardware #2 connect A5,AS Legs with D8 wood bar O——— PCs) < < 08/14
STE P 1 -5: Following below illustration: sing Archway #65,D0wel #3 connect Frame{completed on step 1-3) with Frame{completed on stop 14) to complete! HE{ cei” 11 1] STE Following below illustration: v -Using Dowel #1,HW #11 location with D2,D4 wood bar and D7(x3) Panels @ 16(pcs) 09/14
PCs) -Using Hardware #2 connect A3.A4 legs with D2,D4 wood bar STE P 2-2 .
STE P 2-4 .
STEP 4-2: rotting vou moss 3 Screw 6 slats F1 and 4 least F2 with Side All B1 by using hardware #3.
