Instructions / Assembly

5
Front View
Control Buttons
LED Display Remote Control
Remote Control Operation
BUTTON
FUNCTION
ACTION & INDICATION
POWER
ON: Enables control panel functions and
remote control. Turns on flame effect.
OFF: Disables control panel functions and
remote control. Turns off flame effect.
1. Press once. LED Indicator light turns on.
Power turns on. All functions enabled.
2. Press again. Flame effect turns off.
Power and all functions turn off.
TIMER
TIMER button: Controls timer settings to
turn off fireplace at selected time.
Settings range from 1 hour to 8 hours.
1. Press once. LED Indicator light turns on.
Timer is set to 1 hour.
2. Press again until desired setting is
reached. Indicator lights show setting.
FLAME -
FLAME “-”: Makes flame effect dimmer.
NOTE: Flame effect stays on until power
button is turned off. Flame effect must be
on for heater to turn on.
1. Press once. LED Indicator light turns
on, Flame effect dimmer get ready to
adjust.
2. Press again until desired setting is
reached. Flame effect continues to get
dimmer each time button is pressed.
Control Buttons
Hot Air Vents
LED Display
NOTE: LED Display will goes to sleep
mode 10s after operation, press any
button to wake it up.