INFRARED ELECTRIC FIREPLACE HEATER MODEL # : BEF-26BM02 OWNER’S MANUAL 26 Inch Black Infrared Electric Fireplace AC 120V 60Hz 1200W WARNING Read and understand this entire owner’s manual, including all safety information, before plugging in or using this product. Failure to do so could result in fire, electric shock, or serious personal injury. CAUTION Keep this owner’s manual for future reference. If you sell or give this product away, make sure this manual accompanies this product.
IMPORTANT SAFETY INFORMATION! WARNING ALWAYS keep electric cords, home furnishings, drapes, clothing, papers, or other combustibles at least 3 feet (0.9m) away from the front of this heater, and away from the bottom, sides, and rear of this heater. DO NOT place the heater near a bed because objects such as pillows or blankets can fall off the bed and be ignited by the heater. DO NOT COVER this heater or block the air vents at all. Doing so could cause a fire.
WARNING Risk of electric shock! DO NOT OPEN! No user-serviceable parts inside! ALWAYS disconnect this unit from the power supply before performing any assembly or cleaning, before replacing the light bulb, or before relocating the electric fireplace. NEVER use this heater in bathrooms, laundry rooms, or any other location where the heater could fall into a bathtub or pool, become damp or come in contact with water. NEVER hang this unit on a wall directly below an electrical outlet.
Preparation This product includes a GLASS panel! Always use extreme caution when using. Failure to do so could result in personal injury or property damage. Remove all parts and hardware from the carton and place them on a clean, soft, dry surface. Check the parts list to make sure nothing is missing. Dispose of packaging materials properly. Please recycle whenever possible.
Front View Control Buttons Hot Air Vents LED Display NOTE: LED Display will goes to sleep mode 10s after operation, press any button to wake it up. Control Buttons LED Display Remote Control Remote Control Operation BUTTON FUNCTION ON: Enables control panel functions and remote control. Turns on flame effect. OFF: Disables control panel functions and POWER remote control. Turns off flame effect. TIMER FLAME - TIMER button: Controls timer settings to turn off fireplace at selected time.
FLAME “+”: Makes flame effect brighter. NOTE: Flame effect stays on until power button is turned off. Flame effect must be FLAME + on for heater to turn on. 2. 1. Press once. LED Indicator light turns on, Flame effect brighter get ready to adjust. 2. Press again until desired setting is reached. Flame effect continues to get brighter each time button is pressed. HEATER button: Turns heater on and off. NOTE: The heater only works when the flame effect is on.
Remote Control Battery Information This remote control uses two AAA batteries (Not included). NEVER dispose of batteries in fire. Failure to observe this precaution may result in an explosion. Dispose of batteries at your local hazardous material processing center. Care and Maintenance Cleaning ALWAYS turn the heater OFF and unplug the power cord from the outlet before cleaning, performing maintenance, or moving this fireplace. Failure to do so could result in electric shock, fire, or personal injury.
Troubleshooting ! 1 WARNING DISCONNECTED THE APPLIANCE COMPLETELY AND LET COOL PRIOR TO ANY SERVICE. ONLY A QUALIFIED SERVICE PERSON SHOULD SERVICE AND REPAIR THIS ELECTRIC APPLIANCE. Problem Possible Cause Solution 1. Fireplace turns off and will not turn on. on. 1. Fireplace has overheated and safety devise has caused thermal switch to disconnect or home circuit breaker has opened. 1.
