Energy guide

VIII. Positioning the Door Handle

1. Align the holes in the Left Door (38) with the holes in a Handle (47)

2. Place a Gasket (54) on each Hexagon Bolt (53)

3. Screw in each hole

4. Tighten Hexagon Bolt (53) with a Wrench (59) to secure Handle to Left Door (38)

5. Repeat the previous step to assemble the Left Door (38)

IX. Positioning the Door

1. Insert the Bottom Pivot (37) of the Right Door (46) with handle assembled into the small hole on Platform

(50)

2. Pull down the Right Door Pivot (56) until the upper end is aligned with the top edge of the Right Door (46)

3. Align the Right Door Pivot (56) with the upper hole and pull up the pivot to secure the door. Make a

proper adjustment until the doors can be ﬁrmly closed. To adjust the height of the

door, turn the nut on the pivot to raise or lower the door for proper alignment.

4. Repeat Sept 1 to secure the left Door (38)