Energy guide

13
VI. Attaching the Chamber Door Handle
Insert Hexagon Bolt (53) through Gasket (54) and Lid (9) directly to the handle and tighten up.
VII. Attaching the Smoke Stack and Chimney Cap
1. Place Chimney Cap Assembly (14) over Smoke Stack Assembly (15) with screen facing towards
Smoke Stack Assembly.
2. Twist Chimney Cap Assembly (14) into Smoke Stack Assembly (15) until secure
3. Align the holes in the Smoke Stack Assembly (15) with holes in the Smoke
Stack Gasket (16), which fits between the right end of the Grill and the Smoke
Stack Gasket (16)
4. Insert the Hexagon Bolts (53) with heads facing outward through the holes
in the Smoke Stack Assembly (15), the Smoke Stack Gasket (16), and the Grill
Chamber Assembly (1).
5. Place Gasket (54) on each Bolt (53) from inside Grill Chamber Assembly (1)
6. Secure with Hexagon Nut (55)