Owner Manual

8
3.ATTACHING HOPPER HANDLE TO HOPPER LID:
Keep the Hopper Burner Lid (44) open. Penetrate the Bolt (F) into the hole on the Hopper
Burner Lid (44), then install the Hopper Lid Handle (24) by screwdriver.
4.ATTACHING THE SMOKESTACK AND CHIMNEY CAP:
Place Bolt (A) through the holes of Smokestack (10) and the holes of Smokestack Insulation
(11), attach two Bolts (A), then attach Washer Gasket (G) and Nuts (H), using the Wrench to
tighten them.