Owner Manual

6
Hopper Burner Assembly:
BODY FRAME ASSEMBLY:
1. Attach 2pcs Leg A B (20) (21) to the Leg Base (28) (29) with Bolt (B), Spring Washers (E),
Flat Gasket (J) orderly.
2. Insert Axle Bolt (27) through the hole in Wheel (25) and Wheeled Leg Base (28).
3. Place Washer Gasket (I) onto Axle Bolt (27) and secure with Cap Nut (M). Tighten with
Wrench (L).