Owner Manual

6
1. MOUNTING THE BODY FRAME TO THE CHAMBER
1.Unpack all the items, including the parts packed in the Grill Chamber (1). Turn the body
upside down and place upon the original Styrofoam packing material from the carton.
(CAUTION: Grill is heavy and requires two people to lift.)
2.Take the Right & Left Leg (18)(21) and use the Bolt (C), Washer (H) to assemble the grill
body through the holes. The front and back are assembled in the same way. As shown.
3.Place the Bottom Plate (20) in the middle position of the two legs, attach the Bottom Plate
(20) on Legs by using the Bolt (C) and Washer (H). The four positions are installed in the
same manner. As shown.
4.Push the Axle (23) through the Wheel (22) and then through the hole in the legs as shown.
The Washer (E), Spring Washer (F), and Cap Nut (G) are used to secure the Wheel (22)
assembly in place. Repeat for the other wheel. Press the Wheel Caps (24) firmly into the
outer recess on the wheels as shown.