Brochure

®
4 5
Z-DENS
™
Vent Risers
Z-DENS
™
Vent Riser Kit (VRK)
It is advisable to install condensing boilers, because it helps to
keep our environment green. However the position of the flue
terminal often causes a pluming problem, especially when you
have a wall terminal going straight out through the wall. This
problem can easily be solved by repositioning the flue outlet with a
vent riser kit.
All Z-DENS
®
wall terminals are provided standard with a special
nozzle. With this nozzle it is therefore possible to mount a Vent
Riser Kit (VRK) in minutes, simply by removing the nozzle and easily
clicking the Vent Riser Kit on to the system in any desired angle.
You are ready in only a few minutes…that matters.
Z-DENS
®
VRK is made of PP in the colour black. The complete
system is UV-resistant.
Standard Z-Dens
®
VRK Base Kit 2” Ø (60) includes:
• 1 Z-DENS
®
VRK elbow 90°
• 1 pipe length 500 mm
• 1 elbow 87°
• 1 stainless steel bird mesh/protection
• 2 PVC fixation brackets
Standard Z-DENS
®
VRK Extension Kit Ø 2” (60)
includes:
• 1 pipe length 40” (1000)
• 1 pipe length 20” (500)
• 1 elbow 87°
• 2 elbow 45°
• 2 fixation brackets