Brochure

®
2 3
The newly developed Z-DENS™ wall terminals are designed
with exceptional features. Its appearance is modern, underlining
advanced technical qualities.
Z-DENS™ room-sealed wall terminal is easy to install and suitable
for installation with any condensing boiler.
Telescopic
The telescopic feature enables you to adapt the length of the wall
terminal to the thickness of the wall. No cutting is needed. Easy
installation is guaranteed. The wall terminal is also available in
fixed lengths.
Nozzle
The specially designed end nozzle incorporates advanced
technical qualities.
Aerodynamics
Water Outlet
Special design features of the end nozzle prevent ingress of rain
and condensation into the wall terminal via the air inlet pipe:
All these features (except 1) end up in the collector (6) with drip
edge (7) making sure that rain water and condensation is being
drained, not down the wall but directly to the ground.
Removing
The removal of the end section is simple, only a screwdriver is
needed.
Z-DENS
™
Wall Terminals
‹1›
‹3›
‹4›
‹6›
‹5›
‹2›
Flow 0 m/s 1 m/s 2 m/s 3 m/s
Own resistance (without
wind)
DP in (Pa) 5,6 20 44,1
Pressure loss
with 12 m/s wind
DPmax in (Pa) 5,0 17,0 41,0 70,0
DPmin in (Pa) -42 -21 5 46
Recirculation Max. recirculation 0 2,6 0
1. Drip Lip
2. Water Funnel
3. Partitions With Overflow
4. Covering-Over
5. Dam
6. Collector
7. Drip Edge
‹7›