User Guide

10-1-2013 11
TERMINATION
• If the position of the wall terminal is specifi ed, make a hole
in the wall with a minimum of
a) Ø105mm (Ø4,1”) for terminal Ø60/100mm (Ø2”/4”);
b) Ø130mm (Ø5,1”) for terminal Ø80/125mm (Ø3”/5”);
c) Ø165mm (Ø6,5”) for terminal Ø110/160mm (Ø4”/6”);
• For a good water seal, install the correct wall sealing on
the outside of the wall;
• Install the wall terminal horizontally to the wall and fasten
with 4 timber screws;
• To lock the system, turn two self-drilling screws
Ø3,5x13mm (supplied with vent) into the predrilled holes
of the wall bracket and through the metal air pipe. Don’t
use longer screws as it may damage the internal pipe;
• The wall terminal is now ready to connect with the other
vent parts.
Typical wall situation
——›
TOP VIEW