Product Overview
Z-Vent
®
Commercial Systems
®
Z-Vent Commercial
®
Double Fail Safe
™
Connections
Highest Pressure Rating
Z-VENT
™
Commercial components are supplied with
factory installed, patented, fail safe sealing rating of 8”
W.C.
UL Tested and Listed
Suggested Specification:
Venting shall be Z-Vent
®
model SVE IV as manufactured
by Z-Flex
®
. The vent system shall consist of factory
welded pipe and fittings incorporating a factory fitted
sealing gasket which, when installed in accordance with
the manufacturers installation instructions, will seal the pipe
joints without the use of field applied sealant.
The vent system shall be leakage tested to 8” W.C.
positive pressure. The vent system is listed by Underwriters
Laboratories to UL1738/ULC S636 with a maximum
allowable continuous flue gas temperature of 550°F
Z-VENT
™
Commercial Model SVE IV Special Gas
Vent System, sizes 3” to 24”, are listed by Underwriters
Laboratories to UL1738/S636 Venting Systems for Gas-
Burning Appliances, Category II,III and IV. Conforming to
the Underwriters Laboratories pressure specifications with
the water tight connections, ensure reliability and optimum
vent performance. Leakage tested to 2½ times the UL
pressure rating of 8” W.C.
Z-VENT
™
Commercial components are supplied with
self sealing gasket connections that install in half the time of
field sealed systems.
The special design of the gaskets, along with precision
engineered close tolerance construction components,
ensure an air and water tight fit. This air and water
tight connection ensures optimum vent performance and
reliability.
A revolutionary self sealing Special Gas
Vent System that dramatically reduces the
total installed vent system cost.
•Gasketed connections
•Fusion welded pipe seams
•No sealant required, no cure time or no call
backs
•Air-tight seam, smooth finish, better fit
•Metallic Special gas vent cut to length on site
(single wall version) saves time and lowers cost
•Highest pressure rating in the industry; greater
than five times the industry standard
•Singlewall and Doublewall manufactured in
sizes from 3” to 24”