User Guide

Z-FLEX
®
8. For models GAFK & GIAFK attach liner directly to appliance using appliance connector included in kit.
(See figures 3 & 4)
10. Using a knife or hacksaw, trim the liner to within 1” of the chimney flashing. Secure the Rain Cap to the liner
with three evenly spaced screws (provided).
9. Allow at least 6 inches to 12 inches of the liner to extend above the top of the chimney for attaching Rain
Cap. Place the chimney flashing over the liner and secure to chimney using nail-in anchors. Caulk all joints
with a quality silicone sealant and paint if required.
FLEXIBLE LINER
ROPE
NOSE CONE
SELF TAPPING SCREWS
OR TAPED
FLEXIBLE LINER
FLASHING
LAG BOLTS
CAULKING
6-12 INCHES
DELUXE RAIN CAP
CAP MOUNTING SCREWS (3)
FLASHING
FLEXIBLE LINER
1.00
– 5 –
Typical Installation